Model: Snap Clip Mount
The Hanging Instrument Tether is recommended for hanging a bar code scanner on a forklift, assembly line or a retail environment.
The snap clip allows the retractor to be attached to the cage on the forklift.
The 24 ounce version is used on scanners that weigh more then 16 ounces and less then 24 ounces.
Care and Storage Instructions
- After use, wash in fresh water and allow to dry in a well ventilated area out of direct sunlight
- Store in a well ventilated dry area away from direct sunlight
Barcode Hanging Instrument Tether 24oz Force
Specifications
- Nylon Line w/ Kevlar Core
- Stainless Steel Spring and Hardware
- 80 lbs. Breaking Strength
- Locking Mechanism
Mounting System
Snap Clip Mount
- Snap clips attaches to D-ring on forklift or assembly station
Retracting End Type
Quick Connect-II (Q/C-II)
- Quickly and easily disconnect instrument from Gear Keeper
- Included Accessory: Q/C-II Split Ring
Adhesive Pad-Eye
- See Other Available Accessories
Usage Notes
When it is necessary for the instrument to hang lower or slightly extra reach is required, the Q/C-II Lanyard accessory may be needed.
USE: For use with bar-code & RF scanners weighing more than 16 ounces and less then 24 ounces.
END TYPE: QC-II
LINE TYPE: Spectra/Nylon Line
EXTENSION: 32 inch
BREAK RATING: 80-lb Break Force
FORCE: 24-oz Retraction Force
